Login

AlarmAttendant, Door Access Auto Gate Barrier GateCableCCTV CameraCCTV ProductsCCTV RecoderConference System Door Access Equipment RackFax Guard TourIntercom SystemLong Range Reader ProjectorRaise FloorSmart Cabling SolutionSound SystemSurge Protector TelephoneTelephone systemTOOLTURNSTILEOthers

TH COMMUNICATIONS SDN.BHD.
27, Jalan Badik 17,
Taman Puteri Wangsa,
81800 Ulu Tiram,
Johor, Malaysia.
+607-8676767
+607-8673811
+607-8673812
thcomwong

MAG BRD01 Loop Detector

Previous 3 / 18 Next

MAG BRD01 Loop Detector  Accessory  Barrier Gate
RM 0.00
In Stock


BRD01 – MAG STANDARD VEHICLE LOOP DETECTOR

BRD01 is a single channel loop detector typically installed underneath the floor
to detect a vehicle passing through. It supports adjustable 3 levels of sensitivity
to cater to different heights of vehicle.
Dual-frequency setting to eliminate same frequency interference with adjacent loop coil.

Description

In any card access system, the reader will trigger a barrier gate to open upon
flashing a valid card. But how to allow the barrier gate to automatically
close after the car has passed through ?

If a loop detector is used, the vehicle will trigger the system when it goes over
the inductive loop, which is usually hidden in the ground. This sends a signal
to the barrier gate controller to close as soon as the vehicle exit the lane.
As the loop is buried in the ground, it is a safe and secure system to use.

The loop detector is reliable and cannot be tampered with easily, as the main control is typically hidden inside the barrier gate.

 

Avoid arm hitting a car
A loop detector can also help to prevent the gates from closing too soon.
When the vehicle is passing through, it will break the circuit and tell the gate to remain open,
preventing it from closing on the car. When the barrier arm is descending,
BRD01 will trigger the arm to auto-reverse if it detects another vehicle entering to avoid hitting it.

No human shall pass through barrier gate lane

BRD01 is a metal detector and cannot detect humans. BRD01 will not be able to trigger
the barrier arm to descend if a human walk past through. To avoid this problem,
another BRD01 can be installed to ensure there is a vehicle before activating the reader to accept card reading.

Cannot go in from the opposite direction
In some cases where there is no card access system, BRD01 can be used to automatically
trigger the barrier gate to open upon detecting the presence of any vehicle.
By installing the loop coil in 1 direction, you can effectively block any vehicle trying to enter from the other side.


 
 
 

Specification:

Table BRD01


Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
Subscribe Newsletter